A PCGS MS67 Full Head example sold for $22,913 — yet most 1925 quarters trade for just $18–$40 in circulated grades. The gap between a worn coin and a gem Full Head specimen is one of the most dramatic in all of 20th-century American silver coinage. Use the free calculator below to find out exactly where yours lands.
Select your coin's mint mark, condition, and any known errors to get an instant value estimate.
Not sure which mint, condition, or errors your coin has? There's a 1925 Quarter Coin Value Checker free tool that lets you upload photos and get an AI-powered estimate without needing to know the grading terms first.
Tell us what you see on your coin in plain language — the more detail you provide, the more specific our assessment.
Get a value estimate in under 30 seconds — just pick your coin's condition and we'll do the rest.
Use the Free Calculator →The Full Head (FH) designation is the single biggest value driver for uncirculated 1925 quarters — adding a 200–2,300% premium depending on grade. Use this checker to see if your coin might qualify.
For a complete in-depth 1925 Standing Liberty quarter identification walkthrough covering die states and surface preservation, see that detailed guide. The table below reflects current market data from PCGS, NGC, and Heritage auction results.
| Variety / Designation | Worn (G–VG) | Circulated (F–EF) | Uncirculated (MS60–63) | Gem MS (MS64–67) |
|---|---|---|---|---|
| Standard Strike (No FH) | $18 – $25 | $27 – $100 | $200 – $360 | $400 – $850 |
| ⭐ Full Head (FH) | $18 – $25 | $32 – $130 | $340 – $625 | $700 – $22,913+ |
| Die Clash Error | $30 – $75 | $100 – $200 | $250 – $500 | $500 – $1,000+ |
| Doubled Die Obverse | $25 – $50 | $75 – $200 | $200 – $500 | $500 – $1,500+ |
| Off-Center Strike | $50 – $100 | $100 – $250 | $300 – $600 | $600 – $1,500+ |
| Clipped Planchet | $40 – $100 | $75 – $200 | $200 – $400 | $400 – $1,000+ |
⭐ Gold row = Full Head designation (highest premium). 🔴 Orange row = Die Clash error. Values based on PCGS/NGC/Heritage data. Silver melt floor ≈ $13–$17 depending on spot price.
🪙 CoinHix is a fast on-the-go way to scan your 1925 quarter and get an instant value estimate by photographing both sides — a coin identifier and value app.
Jump to any section:
Error coins from the 1925 Philadelphia issue are scarcer than many collectors realize — the Standing Liberty series as a whole has fewer documented striking errors than contemporary U.S. silver series. When genuine examples do surface, they command consistent premiums over standard specimens at the same grade level. The four varieties below represent the most significant and commonly encountered errors on this date.
A die clash occurs when the obverse and reverse dies strike each other directly without a planchet between them. The impact transfers a mirror image of each die onto the opposing die. On Standing Liberty quarters, the reverse lettering imprints onto the obverse die — and the letter "E" from "E PLURIBUS UNUM" is typically the most visible result on the struck coin.
On the 1925 quarter, look for a faint incuse "E" shape in the obverse field, most commonly near Liberty's right knee or along her lower gown. On strongly clashed examples, additional letters such as "A" or "M" from "AMERICA" may also appear faintly alongside Liberty's figure. Spotting this error reliably requires 5× to 10× magnification under raking light.
The Clashed "E" is the most recognized die error in the entire Standing Liberty series, and collector demand is consistent. A bold, clearly legible impression commands the strongest premiums — worn examples with a faint clash are common enough to add only a small premium, while bold multi-letter clashes in low Mint State holders can reach four figures.
Doubled die errors originate during die manufacture, when the hub impresses the design onto the die at two slightly different rotational or lateral positions. Every coin subsequently struck from that die carries the same doubling — which distinguishes a true DDO from ordinary machine doubling or die wear artifacts that appear inconsistently across a run.
On the 1925 quarter, doubling has been observed on the date numerals, Liberty's helmet and head, and the shield details. Most known examples show subtle rather than dramatic separation. To confirm a genuine DDO, use at least 10× magnification and look for distinct, sharp separation between design elements — a blurry or mushy appearance is more likely strike weakness from a worn die, not hub doubling.
The Standing Liberty series lacks the bold doubled dies found on Lincoln cents or Morgan dollars, making even modest doubling on a 1925 quarter genuinely collectible. Light doubling adds a modest premium above the standard coin; well-defined examples in Mint State with clean surfaces command considerably more and are actively sought by SLQ variety specialists.
An off-center strike occurs when the planchet is not properly seated between the dies at the moment of striking. Part of the blank lies outside the die faces, creating a coin where a portion of the design is replaced by a smooth, blank crescent-shaped area. The degree of misalignment determines nearly everything about value and desirability.
Small shifts of 5–10% are relatively common and add only a modest premium. Misalignments of 20–40% are significantly more dramatic and desirable to error specialists — particularly when the date remains fully visible despite the offset. On a 1925 quarter, the recessed date helps protect it from disappearing even when the design is moderately off-center, which is a key factor for this date's error coins.
Striking errors across the Standing Liberty series are genuinely scarce. Values scale sharply with the percentage of offset and whether the date is visible: a minor 10% shift with date visible might bring $50–$150 in circulated grades, while a dramatic 30–40% off-center with the full date visible and strong luster can reach several hundred dollars or more at major auction venues.
A clipped planchet error originates before the coin is struck. When the metal strip is fed through the blanking press, an overlap or misfeed causes part of the blank disc to be cut away, leaving a curved notch along the edge of the finished coin. The clip can range from a tiny arc barely affecting the rim to a dramatic cut removing a significant portion of the planchet.
The key diagnostic for a genuine clipped planchet is the Blakesley effect — a flattening or weakness in the design directly opposite the clip. This occurs because the missing metal affects how striking pressure distributes across the planchet. Without the Blakesley effect, a curved edge notch is more likely post-mint damage than a true error. On 1925 quarters, clips most often appear along the edge, sometimes removing part of the rim or outer design elements.
Smaller clips are less visually compelling and add only a modest premium — typically $40–$100 over a standard coin in the same grade. Larger clips with a strong, verifiable Blakesley effect are considerably more valuable to error specialists. A dramatic large clip in a mid-grade Mint State holder, showing strong diagnostics with the date fully intact, can bring $200–$400 or more depending on presentation and eye appeal.
Run your coin's details through the calculator to get an estimated value range in seconds.
Calculate My Error Coin's Value →
| Mint | Mint Mark | Mintage | Survival Est. | Notes |
|---|---|---|---|---|
| Philadelphia | None | 12,280,000 | ~20,000 | Only mint producing quarters in 1925; first year of Type 3 recessed-date design |
| Total 1925 Quarters | 12,280,000 | ~20,000 | Survival rate ≈ 0.16% of original mintage | |
Survival estimate from CoinValueChecker research; represents problem-free examples only. Silver melt drives value floor. Mintage confirmed by Wikipedia Standing Liberty quarter mintage figures and PCGS CoinFacts.
| Designer | Hermon A. MacNeil |
| Composition | 90% Silver, 10% Copper |
| Weight | 6.25 grams (0.1808 troy oz silver) |
| Diameter | 24.3 mm |
| Edge | Reeded |
| Type | Type 3 — Recessed Date (1925–1930) |
| Mint Mark Location | None — Philadelphia never used mint marks on SLQ series |
The 1925 quarter's key grading points are Liberty's right knee and shin (obverse high point), the shield rivets, and the eagle's breast feathers (reverse). The recessed date is almost always fully readable — its condition is rarely a grading factor for Type 3 coins.
Liberty's right leg is flat and featureless. The knee is nearly indistinguishable from the shin. Shield rivets are mostly worn away. Eagle's breast is smooth. Date is fully readable in the recess. Value: $18–$25.
Fine: leg separation visible, but detail is worn. Very Fine: clear knee modeling and some shield rivets. Extremely Fine: near-full detail with only slight flattening on knee and eagle's breast. Value: $27–$100.
No circulation wear, but contact marks and bag marks are present. Liberty's breast, knee, and eagle's wing tips show full relief. Luster is present but may be interrupted by numerous marks. Value: $200–$360 (FH: $340–$625).
Exceptional eye appeal with undisturbed luster. Contact marks are minimal. FH designation essentially required for premium values above MS65. At MS67 FH, the coin is among the finest known. Value: $400–$22,913+.
📱 CoinHix helps you match your coin's details against graded examples by photographing it from both sides — a coin identifier and value app — great for comparing condition before you decide to submit for professional grading.
The right venue depends on your coin's grade. Circulated coins and low-MS examples sell fine on eBay or at your local shop. Gem MS and Full Head coins deserve a major auction house audience.
The best venue for MS65 FH and above. Heritage's SLQ collector base is deep and competitive — CAC-approved gems and MS67 FH coins consistently achieve strong results here. Seller fees apply, but realized prices typically justify them for coins valued above $500.
Circulated and lower Mint State 1925 quarters sell reliably on eBay. Check recent sold prices for 1925 standing liberty quarters listed there to set a competitive asking price. Certified (PCGS/NGC) coins attract more bidders and higher bids than raw examples.
Best for quick cash on circulated examples in Good through Fine grades. Dealers typically pay 50–70% of retail for common dates. Bring your coin in problem-free condition — cleaned or damaged coins receive sharply lower offers. Good option for silver melt-range coins.
Collector-to-collector sales avoid auction fees and dealer margins. Works well for mid-grade circulated examples in the $20–$150 range. Buyers are knowledgeable — misrepresenting grade is quickly identified. Include a PCGS or NGC holder photo for best results.
Value depends entirely on condition and strike quality. A heavily worn 1925 Standing Liberty quarter in Good grade starts around $18–$20. Fine examples reach $27–$32. Mint State coins average $200–$360 for standard strikes. The Full Head (FH) designation dramatically raises values — an MS63 FH commands around $600, while gem MS67 FH examples have sold for $22,913, the record for this date.
No. The 1925 quarter has no mint mark because Philadelphia was the only mint that struck quarters that year. Philadelphia never used a mint mark on Standing Liberty quarters throughout the entire series (1916–1930). On coins from other years in the series, branch mint marks appear on the obverse to the left of the date. The absence of a mint mark on a 1925 quarter is entirely normal.
Full Head (FH) is a supplemental designation awarded by PCGS and NGC to sharply struck Standing Liberty quarters. For Type 2/3 coins like the 1925, criteria include: three complete distinct leaves on Liberty's helmet, a complete helmet outline, a clear ear hole, and a complete hairline along the brow. Many 1925 quarters were struck with worn dies, so FH examples command premiums of 200–2,300% over standard strikes depending on grade.
The highest recorded sale for a 1925 Standing Liberty quarter is $22,913, achieved by a PCGS MS67 Full Head example at a Stack's Bowers Galleries auction. This record reflects the extreme rarity of the date at that combination of grade and strike quality. PCGS reports only 19 Full Head coins in MS67 with none finer. An MS66 FH with CAC approval has also reached $5,760 at Heritage Auctions.
The Philadelphia Mint struck 12,280,000 quarters in 1925 — a relatively healthy production figure for the Standing Liberty series. No branch mint (Denver or San Francisco) produced quarters that year. Despite the large original mintage, an estimated 20,000 examples are believed to survive today, representing a survival rate of roughly 0.16%, the result of a century of circulation, silver melts, and coin losses.
Beginning in 1925, the U.S. Mint modified the Standing Liberty quarter's design to sink the date into a recessed channel within the pedestal. Earlier Type 2 coins (1917–1924) had the date exposed atop the pedestal, causing it to wear away rapidly — leaving many coins dateless. The 1925 recessed date design protected the numerals from immediate wear, marking the start of the Type 3 (1925–1930) subtype.
Documented errors include the Die Clash error (the most recognized, featuring ghost impressions of reverse lettering on the obverse — particularly a visible 'E' from E PLURIBUS UNUM), Doubled Die Obverse (subtle doubling on the date, Liberty's head, and shield), Off-Center Strike (planchet misalignment leaving a blank crescent), and Clipped Planchet (curved notch from blanking press misfeeds). The Clashed 'E' is the most commonly cited and highest-premium error type.
Yes. The 1925 Standing Liberty quarter is composed of 90% silver and 10% copper. It weighs 6.25 grams and has a diameter of 24.3 mm. The current silver melt value fluctuates with spot prices — it contains approximately 0.1808 troy ounces of silver. Even heavily worn examples are worth at least their silver melt value, which generally sits in the $14–$17 range depending on current silver spot prices.
Key grading points for the 1925 quarter: check Liberty's right leg and knee (first to show wear), the shield rivets on the obverse, and the eagle's breast feathers on the reverse. Good (G4) shows flat leg with readable date. Fine (F12) has visible but worn drapery. Very Fine (VF20) shows leg modeling. Extremely Fine (EF40) retains near-full detail. Mint State shows no circulation wear. For MS coins, also evaluate Full Head criteria on Liberty's helmet.
For circulated examples, Heritage Auctions, eBay, or a local coin shop all work well. Gem Mint State coins and Full Head specimens should go to a major auction house like Heritage or Stack's Bowers for maximum exposure. Before selling any Mint State or potentially Full Head coin, professional grading by PCGS or NGC is strongly recommended — it verifies authenticity and typically increases sale price by more than the grading fee.
Use the free calculator — select your condition and any errors, and get an instant estimate based on real auction data.
Check My Coin's Value Now →